OUR RUSH SERVICES JUST GOT BETTER: LASERX NOW AVAILABLE FOR E24 AND E48 RUSH SERVICES!
full color
expand your palette
D4 | digital four color process
This 4 color process applies ink directly to an item, followed by a protective clear coat. This results in a raised texture that adds a dimension to your print that brings it to life. Submitted artwork should be at 300+ dpi and must be qualified to print. Wrap imprints are available for an added cost.
H4 | heat transfer four color process
The H4 process is when ink is sprayed onto transfer film, then applied to an item. This is available as a one sided imprint, and can be done as a wrap for an additional cost. Artwork must be submitted at 300+ dpi and qualified to print. Available items are shown below.
4 color processes
D4 | digital
ink printed directly on bottle, followed by clear coating
H4 | heat transfer
ink sprayed onto transfer film, then applied to item
wrap
1 side, 2 sided, or wrap
one side or wrap (allow gap on back)
print resolution
300+ dpi
300+ dpi
color space
CMYK
CMYK
setups
$100(g)
$100(g)
run charge / item
$2.00(g) [1 sided]
$2.25(g) [two sided, wrap]
$1.25(g) 5.25"h x 4"w [1 sided]
$1.75(g) 5.25"h x 10.5"w [wrap - varies/item]
ADDITIONAL DETAILS PRE-PRODUCTION PROOF required for orders over 1000 pieces for both methods or if determined as requirement based on art review, allow 5 working days ART FORMAT ai • eps • pdf • psd • tif [free-floating or stand alone text must be in vector; jpg upon approval] RESOLUTION NEEDED 300+ dpi / 100% to size [higher resolution preferred, free-floating or stand alone text must be in vector] • SPOT COLORS not available
RECOMMENDATIONS
We recommend 1.2 pt line weight for best results.
however, 0.5 pt will print for some curved shapes. Minimum font size should be around 6 pt for clarity.
For any "fancy" fonts, we recommend discussing with the art department beforehand.